retro-imager/embedded/output/config.txt

[HDMI:0]
hdmi_pixel_freq_limit=200000000
[HDMI:1]
hdmi_pixel_freq_limit=200000000
[all]
kernel=zImage
initramfs rootfs.cpio.zst
disable_overscan=1
enable_uart=1
dtoverlay=vc4-fkms-v3d-pi4
dtoverlay=disable-bt
dtoverlay=disable-wifi
arm_boost=1

[cm4]
# Pinmux SoC USB port to XHCI host-only controller
otg_mode=1
Add build scripts for embedded (netboot) edition 2022-02-14 11:03:37 +01:00			`[HDMI:0]`
			`hdmi_pixel_freq_limit=200000000`
			`[HDMI:1]`
			`hdmi_pixel_freq_limit=200000000`
			`[all]`
			`kernel=zImage`
			`initramfs rootfs.cpio.zst`
			`disable_overscan=1`
			`enable_uart=1`
			`dtoverlay=vc4-fkms-v3d-pi4`
			`dtoverlay=disable-bt`
			`dtoverlay=disable-wifi`
Embedded build: use XHCI host-only USB controller block on CM4 Closes #358 2022-02-14 11:11:11 +01:00			`arm_boost=1`

			`[cm4]`
			`# Pinmux SoC USB port to XHCI host-only controller`
			`otg_mode=1`