mirror of
https://github.com/cmclark00/retro-imager.git
synced 2025-05-19 08:25:21 +01:00
333 lines
18 KiB
Text
333 lines
18 KiB
Text
LIBARCHIVE-FORMATS(5) BSD File Formats Manual LIBARCHIVE-FORMATS(5)
|
|
|
|
NAME
|
|
libarchive-formats -- archive formats supported by the libarchive library
|
|
|
|
DESCRIPTION
|
|
The libarchive(3) library reads and writes a variety of streaming archive
|
|
formats. Generally speaking, all of these archive formats consist of a
|
|
series of ``entries''. Each entry stores a single file system object,
|
|
such as a file, directory, or symbolic link.
|
|
|
|
The following provides a brief description of each format supported by
|
|
libarchive, with some information about recognized extensions or limita-
|
|
tions of the current library support. Note that just because a format is
|
|
supported by libarchive does not imply that a program that uses
|
|
libarchive will support that format. Applications that use libarchive
|
|
specify which formats they wish to support, though many programs do use
|
|
libarchive convenience functions to enable all supported formats.
|
|
|
|
Tar Formats
|
|
The libarchive(3) library can read most tar archives. It can write
|
|
POSIX-standard ``ustar'' and ``pax interchange'' formats as well as v7
|
|
tar format and a subset of the legacy GNU tar format.
|
|
|
|
All tar formats store each entry in one or more 512-byte records. The
|
|
first record is used for file metadata, including filename, timestamp,
|
|
and mode information, and the file data is stored in subsequent records.
|
|
Later variants have extended this by either appropriating undefined areas
|
|
of the header record, extending the header to multiple records, or by
|
|
storing special entries that modify the interpretation of subsequent
|
|
entries.
|
|
|
|
gnutar The libarchive(3) library can read most GNU-format tar archives.
|
|
It currently supports the most popular GNU extensions, including
|
|
modern long filename and linkname support, as well as atime and
|
|
ctime data. The libarchive library does not support multi-volume
|
|
archives, nor the old GNU long filename format. It can read GNU
|
|
sparse file entries, including the new POSIX-based formats.
|
|
|
|
The libarchive(3) library can write GNU tar format, including
|
|
long filename and linkname support, as well as atime and ctime
|
|
data.
|
|
|
|
pax The libarchive(3) library can read and write POSIX-compliant pax
|
|
interchange format archives. Pax interchange format archives are
|
|
an extension of the older ustar format that adds a separate entry
|
|
with additional attributes stored as key/value pairs immediately
|
|
before each regular entry. The presence of these additional
|
|
entries is the only difference between pax interchange format and
|
|
the older ustar format. The extended attributes are of unlimited
|
|
length and are stored as UTF-8 Unicode strings. Keywords defined
|
|
in the standard are in all lowercase; vendors are allowed to
|
|
define custom keys by preceding them with the vendor name in all
|
|
uppercase. When writing pax archives, libarchive uses many of
|
|
the SCHILY keys defined by Joerg Schilling's ``star'' archiver
|
|
and a few LIBARCHIVE keys. The libarchive library can read most
|
|
of the SCHILY keys and most of the GNU keys introduced by GNU
|
|
tar. It silently ignores any keywords that it does not under-
|
|
stand.
|
|
|
|
The pax interchange format converts filenames to Unicode and
|
|
stores them using the UTF-8 encoding. Prior to libarchive 3.0,
|
|
libarchive erroneously assumed that the system wide-character
|
|
routines natively supported Unicode. This caused it to mis-han-
|
|
dle non-ASCII filenames on systems that did not satisfy this
|
|
assumption.
|
|
|
|
restricted pax
|
|
The libarchive library can also write pax archives in which it
|
|
attempts to suppress the extended attributes entry whenever pos-
|
|
sible. The result will be identical to a ustar archive unless
|
|
the extended attributes entry is required to store a long file
|
|
name, long linkname, extended ACL, file flags, or if any of the
|
|
standard ustar data (user name, group name, UID, GID, etc) cannot
|
|
be fully represented in the ustar header. In all cases, the
|
|
result can be dearchived by any program that can read POSIX-com-
|
|
pliant pax interchange format archives. Programs that correctly
|
|
read ustar format (see below) will also be able to read this for-
|
|
mat; any extended attributes will be extracted as separate files
|
|
stored in PaxHeader directories.
|
|
|
|
ustar The libarchive library can both read and write this format. This
|
|
format has the following limitations:
|
|
o Device major and minor numbers are limited to 21 bits. Nodes
|
|
with larger numbers will not be added to the archive.
|
|
o Path names in the archive are limited to 255 bytes. (Shorter
|
|
if there is no / character in exactly the right place.)
|
|
o Symbolic links and hard links are stored in the archive with
|
|
the name of the referenced file. This name is limited to 100
|
|
bytes.
|
|
o Extended attributes, file flags, and other extended security
|
|
information cannot be stored.
|
|
o Archive entries are limited to 8 gigabytes in size.
|
|
Note that the pax interchange format has none of these restric-
|
|
tions. The ustar format is old and widely supported. It is rec-
|
|
ommended when compatibility is the primary concern.
|
|
|
|
v7 The libarchive library can read and write the legacy v7 tar for-
|
|
mat. This format has the following limitations:
|
|
o Only regular files, directories, and symbolic links can be
|
|
archived. Block and character device nodes, FIFOs, and sock-
|
|
ets cannot be archived.
|
|
o Path names in the archive are limited to 100 bytes.
|
|
o Symbolic links and hard links are stored in the archive with
|
|
the name of the referenced file. This name is limited to 100
|
|
bytes.
|
|
o User and group information are stored as numeric IDs; there
|
|
is no provision for storing user or group names.
|
|
o Extended attributes, file flags, and other extended security
|
|
information cannot be stored.
|
|
o Archive entries are limited to 8 gigabytes in size.
|
|
Generally, users should prefer the ustar format for portability
|
|
as the v7 tar format is both less useful and less portable.
|
|
|
|
The libarchive library also reads a variety of commonly-used extensions
|
|
to the basic tar format. These extensions are recognized automatically
|
|
whenever they appear.
|
|
|
|
Numeric extensions.
|
|
The POSIX standards require fixed-length numeric fields to be
|
|
written with some character position reserved for terminators.
|
|
Libarchive allows these fields to be written without terminator
|
|
characters. This extends the allowable range; in particular,
|
|
ustar archives with this extension can support entries up to 64
|
|
gigabytes in size. Libarchive also recognizes base-256 values in
|
|
most numeric fields. This essentially removes all limitations on
|
|
file size, modification time, and device numbers.
|
|
|
|
Solaris extensions
|
|
Libarchive recognizes ACL and extended attribute records written
|
|
by Solaris tar.
|
|
|
|
The first tar program appeared in Seventh Edition Unix in 1979. The
|
|
first official standard for the tar file format was the ``ustar'' (Unix
|
|
Standard Tar) format defined by POSIX in 1988. POSIX.1-2001 extended the
|
|
ustar format to create the ``pax interchange'' format.
|
|
|
|
Cpio Formats
|
|
The libarchive library can read a number of common cpio variants and can
|
|
write ``odc'' and ``newc'' format archives. A cpio archive stores each
|
|
entry as a fixed-size header followed by a variable-length filename and
|
|
variable-length data. Unlike the tar format, the cpio format does only
|
|
minimal padding of the header or file data. There are several cpio vari-
|
|
ants, which differ primarily in how they store the initial header: some
|
|
store the values as octal or hexadecimal numbers in ASCII, others as
|
|
binary values of varying byte order and length.
|
|
|
|
binary The libarchive library transparently reads both big-endian and
|
|
little-endian variants of the original binary cpio format. This
|
|
format used 32-bit binary values for file size and mtime, and
|
|
16-bit binary values for the other fields.
|
|
|
|
odc The libarchive library can both read and write this POSIX-stan-
|
|
dard format, which is officially known as the ``cpio interchange
|
|
format'' or the ``octet-oriented cpio archive format'' and some-
|
|
times unofficially referred to as the ``old character format''.
|
|
This format stores the header contents as octal values in ASCII.
|
|
It is standard, portable, and immune from byte-order confusion.
|
|
File sizes and mtime are limited to 33 bits (8GB file size),
|
|
other fields are limited to 18 bits.
|
|
|
|
SVR4/newc
|
|
The libarchive library can read both CRC and non-CRC variants of
|
|
this format. The SVR4 format uses eight-digit hexadecimal values
|
|
for all header fields. This limits file size to 4GB, and also
|
|
limits the mtime and other fields to 32 bits. The SVR4 format
|
|
can optionally include a CRC of the file contents, although
|
|
libarchive does not currently verify this CRC.
|
|
|
|
Cpio first appeared in PWB/UNIX 1.0, which was released within AT&T in
|
|
1977. PWB/UNIX 1.0 formed the basis of System III Unix, released outside
|
|
of AT&T in 1981. This makes cpio older than tar, although cpio was not
|
|
included in Version 7 AT&T Unix. As a result, the tar command became
|
|
much better known in universities and research groups that used Version
|
|
7. The combination of the find and cpio utilities provided very precise
|
|
control over file selection. Unfortunately, the format has many limita-
|
|
tions that make it unsuitable for widespread use. Only the POSIX format
|
|
permits files over 4GB, and its 18-bit limit for most other fields makes
|
|
it unsuitable for modern systems. In addition, cpio formats only store
|
|
numeric UID/GID values (not usernames and group names), which can make it
|
|
very difficult to correctly transfer archives across systems with dissim-
|
|
ilar user numbering.
|
|
|
|
Shar Formats
|
|
A ``shell archive'' is a shell script that, when executed on a POSIX-com-
|
|
pliant system, will recreate a collection of file system objects. The
|
|
libarchive library can write two different kinds of shar archives:
|
|
|
|
shar The traditional shar format uses a limited set of POSIX commands,
|
|
including echo(1), mkdir(1), and sed(1). It is suitable for
|
|
portably archiving small collections of plain text files. How-
|
|
ever, it is not generally well-suited for large archives (many
|
|
implementations of sh(1) have limits on the size of a script) nor
|
|
should it be used with non-text files.
|
|
|
|
shardump
|
|
This format is similar to shar but encodes files using
|
|
uuencode(1) so that the result will be a plain text file regard-
|
|
less of the file contents. It also includes additional shell
|
|
commands that attempt to reproduce as many file attributes as
|
|
possible, including owner, mode, and flags. The additional com-
|
|
mands used to restore file attributes make shardump archives less
|
|
portable than plain shar archives.
|
|
|
|
ISO9660 format
|
|
Libarchive can read and extract from files containing ISO9660-compliant
|
|
CDROM images. In many cases, this can remove the need to burn a physical
|
|
CDROM just in order to read the files contained in an ISO9660 image. It
|
|
also avoids security and complexity issues that come with virtual mounts
|
|
and loopback devices. Libarchive supports the most common Rockridge
|
|
extensions and has partial support for Joliet extensions. If both exten-
|
|
sions are present, the Joliet extensions will be used and the Rockridge
|
|
extensions will be ignored. In particular, this can create problems with
|
|
hardlinks and symlinks, which are supported by Rockridge but not by
|
|
Joliet.
|
|
|
|
Libarchive reads ISO9660 images using a streaming strategy. This allows
|
|
it to read compressed images directly (decompressing on the fly) and
|
|
allows it to read images directly from network sockets, pipes, and other
|
|
non-seekable data sources. This strategy works well for optimized
|
|
ISO9660 images created by many popular programs. Such programs collect
|
|
all directory information at the beginning of the ISO9660 image so it can
|
|
be read from a physical disk with a minimum of seeking. However, not all
|
|
ISO9660 images can be read in this fashion.
|
|
|
|
Libarchive can also write ISO9660 images. Such images are fully opti-
|
|
mized with the directory information preceding all file data. This is
|
|
done by storing all file data to a temporary file while collecting direc-
|
|
tory information in memory. When the image is finished, libarchive
|
|
writes out the directory structure followed by the file data. The loca-
|
|
tion used for the temporary file can be changed by the usual environment
|
|
variables.
|
|
|
|
Zip format
|
|
Libarchive can read and write zip format archives that have uncompressed
|
|
entries and entries compressed with the ``deflate'' algorithm. Other zip
|
|
compression algorithms are not supported. It can extract jar archives,
|
|
archives that use Zip64 extensions and self-extracting zip archives.
|
|
Libarchive can use either of two different strategies for reading Zip ar-
|
|
chives: a streaming strategy which is fast and can handle extremely large
|
|
archives, and a seeking strategy which can correctly process self-
|
|
extracting Zip archives and archives with deleted members or other in-
|
|
place modifications.
|
|
|
|
The streaming reader processes Zip archives as they are read. It can
|
|
read archives of arbitrary size from tape or network sockets, and can
|
|
decode Zip archives that have been separately compressed or encoded.
|
|
However, self-extracting Zip archives and archives with certain types of
|
|
modifications cannot be correctly handled. Such archives require that
|
|
the reader first process the Central Directory, which is ordinarily
|
|
located at the end of a Zip archive and is thus inaccessible to the
|
|
streaming reader. If the program using libarchive has enabled seek sup-
|
|
port, then libarchive will use this to processes the central directory
|
|
first.
|
|
|
|
In particular, the seeking reader must be used to correctly handle self-
|
|
extracting archives. Such archives consist of a program followed by a
|
|
regular Zip archive. The streaming reader cannot parse the initial pro-
|
|
gram portion, but the seeking reader starts by reading the Central Direc-
|
|
tory from the end of the archive. Similarly, Zip archives that have been
|
|
modified in-place can have deleted entries or other garbage data that can
|
|
only be accurately detected by first reading the Central Directory.
|
|
|
|
Archive (library) file format
|
|
The Unix archive format (commonly created by the ar(1) archiver) is a
|
|
general-purpose format which is used almost exclusively for object files
|
|
to be read by the link editor ld(1). The ar format has never been stan-
|
|
dardised. There are two common variants: the GNU format derived from
|
|
SVR4, and the BSD format, which first appeared in 4.4BSD. The two differ
|
|
primarily in their handling of filenames longer than 15 characters: the
|
|
GNU/SVR4 variant writes a filename table at the beginning of the archive;
|
|
the BSD format stores each long filename in an extension area adjacent to
|
|
the entry. Libarchive can read both extensions, including archives that
|
|
may include both types of long filenames. Programs using libarchive can
|
|
write GNU/SVR4 format if they provide an entry called // containing a
|
|
filename table to be written into the archive before any of the entries.
|
|
Any entries whose names are not in the filename table will be written
|
|
using BSD-style long filenames. This can cause problems for programs
|
|
such as GNU ld that do not support the BSD-style long filenames.
|
|
|
|
mtree
|
|
Libarchive can read and write files in mtree(5) format. This format is
|
|
not a true archive format, but rather a textual description of a file
|
|
hierarchy in which each line specifies the name of a file and provides
|
|
specific metadata about that file. Libarchive can read all of the key-
|
|
words supported by both the NetBSD and FreeBSD versions of mtree(8),
|
|
although many of the keywords cannot currently be stored in an
|
|
archive_entry object. When writing, libarchive supports use of the
|
|
archive_write_set_options(3) interface to specify which keywords should
|
|
be included in the output. If libarchive was compiled with access to
|
|
suitable cryptographic libraries (such as the OpenSSL libraries), it can
|
|
compute hash entries such as sha512 or md5 from file data being written
|
|
to the mtree writer.
|
|
|
|
When reading an mtree file, libarchive will locate the corresponding
|
|
files on disk using the contents keyword if present or the regular file-
|
|
name. If it can locate and open the file on disk, it will use that to
|
|
fill in any metadata that is missing from the mtree file and will read
|
|
the file contents and return those to the program using libarchive. If
|
|
it cannot locate and open the file on disk, libarchive will return an
|
|
error for any attempt to read the entry body.
|
|
|
|
7-Zip
|
|
Libarchive can read and write 7-Zip format archives. TODO: Need more
|
|
information
|
|
|
|
CAB
|
|
Libarchive can read Microsoft Cabinet ( ``CAB'') format archives. TODO:
|
|
Need more information.
|
|
|
|
LHA
|
|
TODO: Information about libarchive's LHA support
|
|
|
|
RAR
|
|
Libarchive has limited support for reading RAR format archives. Cur-
|
|
rently, libarchive can read RARv3 format archives which have been either
|
|
created uncompressed, or compressed using any of the compression methods
|
|
supported by the RARv3 format. Libarchive can also read self-extracting
|
|
RAR archives.
|
|
|
|
Warc
|
|
Libarchive can read and write ``web archives''. TODO: Need more informa-
|
|
tion
|
|
|
|
XAR
|
|
Libarchive can read and write the XAR format used by many Apple tools.
|
|
TODO: Need more information
|
|
|
|
SEE ALSO
|
|
ar(1), cpio(1), mkisofs(1), shar(1), tar(1), zip(1), zlib(3), cpio(5),
|
|
mtree(5), tar(5)
|
|
|
|
BSD December 27, 2016 BSD
|