retro-imager/embedded/output/config.txt

[HDMI:0]
hdmi_pixel_freq_limit=200000000
[HDMI:1]
hdmi_pixel_freq_limit=200000000
[all]
kernel=Image.gz
initramfs rootfs.cpio.zst
disable_overscan=1
enable_uart=1
dtoverlay=vc4-kms-v3d
dtoverlay=disable-bt
dtoverlay=disable-wifi
arm_boost=1
arm_64bit=1

[cm4]
dtoverlay=dwc2,dr_mode=host
Add build scripts for embedded (netboot) edition 2022-02-14 11:03:37 +01:00			`[HDMI:0]`
			`hdmi_pixel_freq_limit=200000000`
			`[HDMI:1]`
			`hdmi_pixel_freq_limit=200000000`
			`[all]`
Embedded: switch to 64-bit environment and 6.1 kernel 2023-10-03 18:11:23 +02:00			`kernel=Image.gz`
Add build scripts for embedded (netboot) edition 2022-02-14 11:03:37 +01:00			`initramfs rootfs.cpio.zst`
			`disable_overscan=1`
			`enable_uart=1`
Embedded: switch to 64-bit environment and 6.1 kernel 2023-10-03 18:11:23 +02:00			`dtoverlay=vc4-kms-v3d`
Add build scripts for embedded (netboot) edition 2022-02-14 11:03:37 +01:00			`dtoverlay=disable-bt`
			`dtoverlay=disable-wifi`
Embedded build: use XHCI host-only USB controller block on CM4 Closes #358 2022-02-14 11:11:11 +01:00			`arm_boost=1`
Embedded: switch to 64-bit environment and 6.1 kernel 2023-10-03 18:11:23 +02:00			`arm_64bit=1`
Embedded build: use XHCI host-only USB controller block on CM4 Closes #358 2022-02-14 11:11:11 +01:00
			`[cm4]`
Revert CM4 USB controller back to dwc2 SDXC controller was not playing nice with rpiboot. 2022-02-23 16:03:29 +01:00			`dtoverlay=dwc2,dr_mode=host`